607-Z bearing, Single row deep groove ball bearings 7x19x6, 60017, 0.0076 KG

607-Z

Bore

7 mm

Outer

19 mm

Width

6 mm

Wight

0.0076 kg

Capped single row deep groove ball bearings

High speed, precision, and low noise; mainly used in precision equipment such as micro motors, medical devices, and industrial robots.

🔍

1/2

Main technical Specifications

New Designations :

607-Z

Old Code :

60017

Main demensions :

7 × 19 × 6

Bore Dia × Outside Dia × Width Dia (mm)

M :

0.0076 kg

Weight

HS Code :

8482102000

Bearing customs code

ID :

7 mm

Inside diameter(I.D.)

OD :

19 mm

Outside diameter(O.D.)

T(B) :

6 mm

Thickness(W.D.)

Cr :

2.335 kN

Radial dynamic load rating

C0r :

0.943 kN

Radial static load rating

Grease rpm :

84951 r/min

Reference speed

Oil rpm :

52950 r/min

Limiting speed

Category :

Single row deep groove ball bearings

Detailed parameters and installation dimensions:

Part Number	607-Z
Cage	Stamped steel cage, ball centred
Rows NO.	One
Series	60..-Z
Principal Dimensions Inside - d φ (mm)	7
Principal Dimensions Outside - D Φ (mm)	19
Principal Dimensions Width - B (mm)	6
Minimum load coefficient - kr	0.025
Calculation coefficient - f0	13
Dynamic Radial Capacity - C_r	2335 N \| 524 lbf
Static Radial Capacity - C_0r	943 N \| 211 lbf
Ring Material	GCr15SiMn
Dimension - d₁	11.1 mm \| 0.437 inch
Bore Type	Cylindrical bore
Seal	Z = Shield on one sides
Dimension - D₂	16.5 mm \| 0.650 inch
Speed ratings (grease) - n_B	84951 r/min
Lubricant	No
Dimension Chamfer - r₁,r₂ (min.)	0.3 mm \| 0.012 inch
Fillet dimensions - r_a(max.)	0.3 mm \| 0.012 inch
Speed ratings (oil) - n_G	52950 r/min
Fatigue load limit - P_u	39 N \| 8 lbf
Internal clearance	CN
Outer ring feature	No
Principal Dimensions Inside - d φ (inch)	0.276
Principal Dimensions Outside - D Φ (inch)	0.748
Principal Dimensions Width - B (inch)	0.236
Heat stabilized	120 °C (250 °F)
Ball Material	GCr15SiMn
Bearing type	Capped single row deep groove ball bearings
Bearing Mass - m	0.0076 kg \| 0.017 lb
Manufacturer Part Code	607.Z
Abutment dimensions - d_a(min.)	9 mm \| 0.354 inch
Tolerance class	P6
Abutment dimensions - d_a(max.)	11 mm \| 0.433 inch
Abutment dimensions - D_a(max.)	17 mm \| 0.669 inch
Radial run-out	PN
Dimensional tolerances	P6

The equivalents & Variants model of 607-Z Single row deep groove ball bearings:

NTN 607Z , STEYR 607Z , KOYO 607Z , NSK 607Z , NACHI 607Z , FAG 607ZR , SKF 607-Z , SNR 607Z , RHP 607Z ,

NOTE: All other trademarks are the property of their respective owners, used for the purpose of compatibility description and product identification only. Tradebearings is not affiliated with, endorsed by, or sponsored by the holders of these trademarks.

607-Z refers to a type of 60..-Z Capped single row deep groove ball bearings, with dimensions 7 mm (Bore) x 19 mm (OD) x 6 mm (Width), designed for High precision, small size, low friction, primarily used in Miniature motors, dental drills, precision instruments, models, Its normal operating speed can reach: the grease speed ratings: 84951 rpm, oil speed ratings: 52950 rpm, featuring One (row) construction, Stamped steel cage, ball centred retainer to ensure extended service life, for applications Within an extremely limited space, it provides high-precision, low-friction, high-speed support for rotating or reciprocating components, while simultaneously bearing certain radial and axial loads. it's built to handle significant loads (dynamic radial: 2335 N, static radial: 943 N, ), It weight approximately 0.0076 kilogram.

Min. Order: 1 Piece/(607-Z, 7 = ID, 19 = OD, 6 = B, 0.0076 kg) or according to different suppliers
Price: Different brands, different quality, different 607-Z prices, different suppliers and different quality determine different prices, you can ask the supplier in detail for the price according to your own needs.
Precision Rating: DIN: P2~P0; ANSI: ABEC9~ABEC1; JIS: JIS~JIS0; ISO: CLASS2~NORMAL CLASS; GB/T30794 B~G
Inquiry ways: The right of the inquiry form, Email, skype, Whatsapp

Specifications From Tradebearings:

Reference From SKF 607-Z Bearing, Deep Groove Ball, Radial, Cylindrical Bore, 7 mm id x 19 mm OD x 6 mm B, Single Shielded;
Manufacturer Part Code: 607 Z;
Dimension Inside - id φ: 7 mm;
Dimension Outside - OD Φ: 19 mm;
Dimension Width - B: 6 mm;
Type Of Bore: Straight Bore;
Type of Closure: Single Shielded;
Number of Rows & Fill Slot: 1;
Radial Internal Play: CN;
Radial (Dyn.load Cr): 530 lbf;
Radial (Stat.load Cor): 210 lbf;
Running Accuracy Class: ABEC 3;
Sealing Ring Type: Non-contacting seal;
Surface Coating: NO;
Material of Bearing: Bearing steel;
Material of Cage: Bearing steel;
Width Of Inner Ring: 6 mm;
Width Of Outer Ring: 6 mm;
Fillet Radius(ra): 0.3 mm;
Limiting speed (1/min): 43000 RPM;
Bearing Series: 607;
Bearing Mass (M): 0.02 lbs

Remind

The Bearing designations and dimensions Enquiry System for reference only, and The actual data will be subject to the national standard, assumes no responsibility for the tradebearings.

✅ Features And Application

✨What are the Benefits of choosing 607-Z bearings?

Minimal Size: Inner diameter can be as small as 1 mm or even smaller, saving installation space and suitable for micro motors and instruments.
Ultra-High Speed: Optimized design enables extremely high limiting speeds and extremely low heat generation.
Low Friction Torque: Minimal starting and running friction torque, high sensitivity, ensuring precise control.
Low Noise and Vibration: Precision machining ensures smooth and quiet operation, suitable for precision instruments.
Long Lifespan: Utilizing high-quality materials and processes guarantees stable operation over extended periods.
The 607-Z Single row deep groove ball bearings adopts a High precision, small size, low friction design, with dimensions an inner diameter of 7 mm, an outer diameter of 19 mm, a width of 6 mm, featuring One (row) construction from 60..-Z (series), a clearance of CN, ensure the equipment operates more stably , and the maximum speed can reach (Limit Speed Ratings (grease) rpm:84951 Limit Speed Ratings (oil) rpm:52950)for applications Within an extremely limited space, it provides high-precision, low-friction, high-speed support for rotating or reciprocating components, while simultaneously bearing certain radial and axial loads.

🏭 What are the applications of the 607-Z bearing?

Medical/Dental: Used in dental drills, surgical instruments, and analytical instruments. Ultra-high speed and low friction ensure precise control and stability.
Precision Instruments: Used in measuring equipment, encoders, and optical instruments. Extremely low vibration and high sensitivity guarantee measurement accuracy.
Motors/Models: Used in miniature motors, cooling fans, drones, and remote-controlled models. Extremely small size and low noise allow for high-speed rotation.
Office/Home Appliances: Used in hard drives, printer motors, and robotic vacuum cleaners. Long lifespan and low friction torque ensure stable and quiet operation.

Comments

tradebearings

Please give me price quote for 15 pieces of 5x16x5x and also for 15 pieces of 7x19x6 bearing with shipping to the United states (zip: 01609). I am interested in both deep-grove open and also metal shielded (one side). Please send the manufacturer information such as SKF, ASK, etc. I shall order more bearings if you have the bearings I want. With best regards,

Comment

607-Z

Main technical Specifications

Detailed parameters and installation dimensions:

The equivalents & Variants model of 607-Z Single row deep groove ball bearings:

Specifications From Tradebearings:

Enquiry Poland FLT-058 FLT-1 NM

✨What are the Benefits of choosing 607-Z bearings?

🏭 What are the applications of the 607-Z bearing?

Comments

tradebearings

Leave A Comment

Other models the same size : 7x19x6

VEX 7 /NS 5CE3 UL

EX 7 5CE1 UL

EX 7 /NS 5CE1 UL

EX 7 5CE3 UL

EX 7 /NS 5CE3 UL

VEX 7 9CE1 UL

VEX 7 /NS 9CE1 UL

VEX 7 9CE3 UL

Remind

Quick Links

Follow us

Sign in or Enquiry Free

Enquiry Free