7006CE/HCDGAVQ126
Main technical Specifications
Detailed parameters and installation dimensions:
| Part Number | 7006CE/HCDGAVQ126 |
| Internal design | CE = 15° contact angle, high-speed E design |
| Dimension series | ISO dimension series 10 |
| Bearing Type | super-precision angular contact ball bearings |
| Series | 70..-CE/HCDGAVQ126 |
| Rows NO. | 2 |
| Bearing Mass - m | 0.21 kg | 0.463 lb |
| Accuracy class | P4A |
| Cage | Cotton fabric reinforced phenolic resin or carbon fibre reinforced PEEK, outer ring centred |
| Seal | Open |
| Ball material | HC = Hybrid bearing (ceramic balls) |
| Ring material | Carbon chromium steel |
| Bore Type | Z = Cylindrical Bore |
| Matched arrangement | Universal matching |
| Arrangement and preload | DGA = Set of two bearings for universal matching, Light preload |
| Reference From | SKF 7006CE/HCDGAVQ126 |
| Dimension | |
| Bore - d φ | 30 mm | 1.181 inch |
| d tolerance | -0.004 mm to 0 |
| Outside - D Φ | 55 mm | 2.165 inch |
| D tolerance | -0.004 mm to 0 |
| Width - B | 26 mm | 1.024 inch |
| B tolerance | -0.2 mm to 0 |
| Balls diameter | 6.35 mm | 0.250 inch |
| Balls qty | 17 |
| d1 | 38.2 mm |
| d2 | 36.4 mm |
| D1 | 45.81 mm |
| Chamfer - r1,r2(min.) | 1 mm |
| Chamfer - r3,r4(min.) | 0.6 mm |
| Fillet - ra(max.) | 1 mm |
| Fillet - rb(max.) | 0.6 mm |
| Load Capacity and speeds | |
| Dynamic Radial - Cr | 14968 N | 3364 lbf |
| Static Radial - C0r | 10328 N | 2321 lbf |
| Fatigue Radial - Pu | 308 N | 69 lbf |
| Properties | |
| Axial clearance/preload | Extra light preload |
| Lubrication | No |
| Contact angle - α | 15 ° |
| Universal matching | Yes, back-to-back (<>), face-to-face (><) or tandem (>>) |
| Temperature - T(min) | -30 °C |
| Temperature - T(max) | 110 °C |
| Manufacturer Part Code | 7006 CE/HCDGAVQ126 |
| Units | Metric |
| Load Direction | Angular Contact |
| Contact type | 2-point contact |
| Ring type | inner rings(1 piece), outer rings(1 piece) |
| Coating | No |
| Reference grease quantity - Gref | 1.7 cm3 |
| Preload class | A |
| Preload - G | 46 N |
| Axial stiffness | 31 N/µm |
| Coefficient - f0 | 7.9 |
| Abutment dimensions | |
| da(min.) | 34.6 mm |
| db(min.) | 34.6 mm |
| Da(max.) | 50.4 mm |
| Db(max.) | 50.8 mm |
| dn | 39.9 mm |
NOTE: All other trademarks are the property of their respective owners, used for the purpose of compatibility description and product identification only. Tradebearings is not affiliated with, endorsed by, or sponsored by the holders of these trademarks.
7006CE/HCDGAVQ126 refers to a type of 70..-CE/HCDGAVQ126 super-precision angular contact ball bearings, with dimensions 30 mm (Bore) x 55 mm (OD) x 26 mm (Width), designed for ceramic balls materials, high speed, ultra-high precision and high thermal stability, corrosion resistant, non-magnetic, primarily used in Machine tool spindle, robot reducer and high-precision machinery, featuring 2 (row) construction, Cotton fabric reinforced phenolic resin or carbon fibre reinforced PEEK, outer ring centred retainer to ensure extended service life, advanced Open, P4A (precision) for applications In high-speed, high-precision, high-rigidity, and extreme environments, it provides extremely stable and reliable rotary supports for modern high-end manufacturing, high-tech industries, and high-precision rotating equipment. it's built to handle significant loads (dynamic radial: 14968 N, static radial: 10328 N, ), It weight approximately 0.21 kilogram.
- Min. Order: 1 Piece/(7006CE/HCDGAVQ126, 30 = ID, 55 = OD, 26 = B, 0.21 kg) or according to different suppliers
- Price: Different brands, different quality, different 7006CE/HCDGAVQ126 prices, different suppliers and different quality determine different prices, you can ask the supplier in detail for the price according to your own needs.
- Precision Rating: DIN: P2~P0; ANSI: ABEC9~ABEC1; JIS: JIS~JIS0; ISO: CLASS2~NORMAL CLASS; GB/T30794 B~G
- Inquiry ways: The right of the inquiry form, Email, skype, Whatsapp
Data Transfering...
✨What are the Benefits of choosing 7006CE/HCDGAVQ126 bearings?
🏭 What are the applications of the 7006CE/HCDGAVQ126 bearing?
📐 How should choose the right model for a Angular contact ball bearings, super-precision?
Step 1: Select Series by Size
Determine the ISO size series based on installation space and load requirements:
718 Series: Ultra-light, extremely low cross-section height, suitable for space-constrained applications.
719 Series: Extremely light, a general-purpose choice, balancing rigidity and speed.
70 Series: Light, the most commonly used series, with a wide range of applications.
72 Series: Robust, largest cross-section, suitable for heavy-duty, relatively low-speed applications.
Step 2: Select Internal Design by Working Condition (Crucial)
This is the core of SKF selection; different suffixes correspond to different performance orientations:
High Load Capacity D Design: Suffix CD (15° contact angle) or ACD (25° contact angle). Utilizes a large ball design, offering the highest rigidity and load-bearing capacity, suitable for general-purpose machine tool spindles such as machining centers and lathes.
High Speed E Design: Suffix CE (15°), FE (18°), or ACE (25°). Featuring a small, multi-ball design, this bearing boasts higher speed capabilities than the D design, suitable for ultra-high-speed applications such as electric spindles and PCB drilling.
High-Speed B Design: Suffixes CB (15°), FB (18°), or ACB (25°). Smaller and lighter balls, suitable for extremely high speeds and light loads.
UltraFast A Design: Suffix AB (20° contact angle). Available only with hybrid ceramic balls, designed specifically for electric spindles demanding extreme speeds.
Sealed W Design: Suffix FW (18° contact angle). Available only with hybrid ceramic balls, featuring double-sided sealing and lifetime lubrication, suitable for medium-to-high-speed, maintenance-free equipment such as woodworking machinery.
Step 3: Identifying the Seal and Suffix
Seal Identification (Prefix): Models starting with S indicate double-sided sealing (e.g., S7010), pre-filled with grease at the factory, requiring no maintenance for life. Those without S are open bearings.
Material: HC indicates hybrid ceramic balls (ceramic balls + steel rings), enabling higher speeds, electrical insulation, and longer lifespan.
Preload (universal pairing): GA (ultra-light preload), GB (light preload), GC (medium preload). This is a suffix for a single bearing, indicating that the bearing can be arbitrarily paired and combined to achieve a specified preload.
Precision: P4 (ISO Class 4, standard ultra-precision), P4A (operating precision higher than P4), P2 (highest grade).
Arrangement (pair/group suffix): DB (back-to-back), DF (face-to-face), DT (tandem), QBC (quadruple, tandem back-to-back configuration), etc.
Typical Model Explanation
Taking S7010 ACD/HCP4A QBC C as an example:
S: Double-sided seal (lifetime lubrication)
7010: 70 series, 50mm inner diameter
ACD: 25° contact angle, D design (high load capacity)
HC: Hybrid ceramic balls
P4A: Precision grade (super P4)
QBC: Quadruple bearing assembly, tandem back-to-back configuration
C: Medium preload (for heavy preload)
Taking 71922 CDGB TNHA/PA9A L as an example:
71922: 719 series, 110mm inner diameter
CD: 15° contact angle, D design (high load capacity)
GB: Light preload (universal matching)
TNHA: Glass fiber reinforced PEEK cage, outer ring centering
PA9A: Precision grade (ISO) Level 2)
L: Light preload (for triple/quadruple units only)
Selection Key Points Summary
First determine the series: 718/719/70/72
Then determine the design: CD/ACD (high load capacity) or CE/ACE (high speed) or FW (sealing) or AB (UltraFast)
Confirm the seal: Select the S prefix for lifetime lubrication
Optional suffixes: Material HC, Preload GA/GB/GC, Accuracy P4/P4A, Arrangement DB/DF/DT/QBC